Click image for enlargement. |
|||
|
These are the prototypes for a new design of the device used to hold the lease sticks used in warping the loom. Don't worry you will see what I mean as they develop. (05:10:2018) |
||
|
Time to drill square holes again! Easer than drilling round holes and sanding them square. Boy do I wish I had bought a better (more $$$$$'s) mortising tool. (06:10:2018) |
|
||
|
This is what the drill looks like as you start the hole. (06:10:2018) |
||
|
After some sanding, fit back on the loom. From here I'll wait to see if the prototypes work before I remake them in a hard wood. These are cedar, and very soft. Sheila here - These are for holding the lease sticks when threading the loom. This loom already has a warp at the minute, so they will sit a little lower. (06:10:2018) |
|
||
|
This is how they work when threading the loom! Used to separate individual threads so they can be kept in order. (07:10:2018) |
||
|
Turning pins for the end of the leash sticks, so they wont rattle out. (08:10:2018) |
|
||
|
finished pins. (09:10:2018) |
||
|
|||
